220V Industrial Air Conditioner Portable Industrial Cooling Unit 22178 BTU/h Three-Tube 14L Tank for Hospitals Workshops Events 2400W

• This product is industrial cooling and air-conditioning equipment, not a house-ware.It is suitable for hospitals, research institutes, auto repair centers, manufacturing engineering cooling, factory production workshops, canteens, warehouses, various celebrations, etc.

A Special-designed big water tank and a drain hose to allow its continuous and safe draining.And with simple self-diagnosis function,more safe.

Precautions：

• 1. This product is industrial cooling and air-conditioning equipment, not a houseware.
• 2.This machine cannot cool the whole space (if the whole space needs to be cooled down, it is necessary to install pvc hose or aluminum foil single tube at the hot air outlet to discharge the hot air outside）
• 3. The design and use environment of this product is 18-45℃. If the temperature is lower than or higher than this temperature zone, the equipment will not operate normally, not the product itself is malfunctioning.
• 4. The noise of this product is 60-70 decibels

Method of operation：

• Power switch
• Turn on the power, the power switch indicator light is on, press the button to turn on and off the machine.
• Air volume selection
• Press the button to choose automatic wind
• Cold air temperature setting
• Press the cold air temperature setting key, and the cold air temperature indicator will light up at the same time. At this time, press the upper and lower temperature adjustment buttons to set the desired outlet air temperature, that is, run in the cold air set temperature mode. The cold air temperature can be set from 0°C to 30°C. When the cold air temperature is 1°C higher than the set temperature, the compressor works and the air outlet outputs cold air; when the cold air temperature is 1°C lower than the set temperature, the compressor stops working and the air outlet outputs natural air.
• Environmental temperature setting
• Press the button, the machine detects and displays the inlet air temperature, and the inlet air temperature indicator lights up at the same time. Press the upper and lower temperature adjustment buttons to set the desired inlet air temperature, that is, run in the inlet air set temperature mode, and the inlet air temperature can be set from 18°C ​​to 35°C. When the inlet air temperature is 1°C higher than the set temperature, the compressor works, and the air outlet outputs cold air; when the inlet air temperature is 1°C lower than the set temperature, the compressor stops working, and the air outlet outputs natural air.
• Alarm indicator
• When the machine is full of water, overcurrent, overheating, or ultra-high pressure, the alarm indicator will light up, the machine will stop running, and the LED display will show the corresponding fault code.

Maintenance and inspection:

• Please clean the filter regularly. If dust and dirt accumulate on the filter, it will affect the air intake, easily cause frost on the heat exchanger, affect the cooling effect, and cause the machine to malfunction.
• To clean the filter, please lift the filter up and then take it out directly.
• Use a vacuum cleaner to absorb the dust on the filter, then clean it with water or a neutral detergent, and restore it to use after it is completely dry.
• Note:When cleaning the surface of the machine, do not use chemicals such as thinner, volatile oil, etc., otherwise it will affect the appearance of the machine.
• Please always check whether the parts and screws are loose. If there is any looseness, please tighten it in time to remove it. Before the machine is not used for a long time, please pour out the accumulated water in the water storage bucket and store it after the machine is dry.
• Do not store the machine horizontally or upside down.
• Please keep the machine out of the reach of children, and avoid storing it in places subject to high temperature, splashing rain and direct sunlight.
• During maintenance and inspection, be sure to cut off the power supply.
• Be sure to cut off the power supply when storing the machine.

From the perspective of consumers, we provide products that are more suitable for consumers' needs and provide better services. It is committed to creating a high-quality and comfortable consumption space for consumers.

DETAILS

CONSUMER FIRST