10,000 BTU Portable Air Conditioners for Room Up to 450 Sq.Ft, 4-in-1 Portable AC Unit, Heater, Dehumidifier & Fan with Remote Control, Self Evaporation System, LED Display
-
Detail1Product Package2Install Window Kit
What should i do before using the air conditioner？
1. Inspect the packaging and product are intact, let the unit sit for 24 hours before using. 2. The room temperature is between 41℉-95℉ 3. Install the hose and window kit according to the instructions. 4. Observe whether the indicator light is on.
Only the fan works, no cooling or poor cooling effect?
1. Install the window kit 2. Check if the hose is bent or blocked 3. Check if the compressor is working properly 4. Check if the filter is dirty 5. Whether the set temperature is lower than room temperature 6.Empty the water tank
How to reduce the frequency of drainage?
1. In cooling mode, use a drain hose to connect to the middle drain hole to achieve continuous drainage. 2. In heating mode, connect the drain hose to the bottom drain hole and find a lower container at the other end for drainage.
What is the normal room temperature for compressor operation?
41℉-95℉(5-35°C)
How to reduce noise？
1.Place the unit on horizontal and firm ground 2.Secure and tight the parts 3.Noise comes from flowing refrigerant. This is normal.
Cooling Mode
Heating Mode
Dry Mode
Fan Mode
Self Evaporation
Two Drainage Methods
Easy to Move
Product Package
Install Window Kit
Vertical Window
Horizontal Window
What should i do before using the air conditioner？
Only the fan works, no cooling or poor cooling effect?
How to reduce the frequency of drainage?
What is the normal room temperature for compressor operation?
How to reduce noise？
-
Customer ReviewsNo comments