Angular Contact Bearings 7014 7015 7016 7017 7018 7019 7020 AC/P5(7014AC DFD P4)

A single free matching bearing can be freely combined according to your needs, such as DB, DT, DF, etc.

The use of steel for bearings, special heat treatment processes, advanced manufacturing equipment and technology has greatly increased the service life of
bearings and cost savings for equipment with high requirements and difficult to disassemble and assemble.
Advanced ferrule forging, heat treatment deformation control technology with advanced level.
Product analysis
Angular Contact Bearing
Angular contact ball bearings are particularly suitable for supporting composite loads, i.e. both.
radial and axial loads. The load capacity of axial loads increases with the increase of
contact angle A. The contact angle is defined as the angle between the common normal of
the contact point between the rolling body and the raceway or the center line of contact; and
the radial plane of the bearing. The load is transferred from one raceway to another.
along the connecting line. For single row bearings, the contact angle can be identified by
suffixes of different codes.
Single Row Angular Contact Ball Bearing
1. Structure features
Single-row angular contact ball bearings can only withstand unidirectional axial loads. Under the action of
radial load, there will be an axial force in the bearing, which must be adjusted by a reaction force.
Therefore, this type of bearing usually needs to depend on the second bearing to balance.
Single row angular contact ball bearings can be loaded with more steel balls, so that the bearing has
increased carrying capacity. Contact angles are 15 degrees, 25 degrees, 40 degrees and
suffixes are C, AC, B, respectively.
2.Compo