Flysky PL18 Ultra Paladin 18CH Radio Remote Controller Transmitter 3.5-inch IPS Touch Screen Compatible with FTr8B AFHDS 3 Protocol Receiver for Rc Airplane Helicopter Car Boat Robot Glider

Specification:
Brand: FLYSKY
Product Model: PL18 Ultra Paladin
Color: Black
Number of Channels: 18
Number of Bands: 171
RF: 2402.15MMHz-2479.85MMHz
Maximum Power: <20 dBm (e.i.r.p.) （EU
RF Protocol: AFHDS 3
Channel Resolution: 4096
Input Power : 1S (3.6V)*8700mAh
Charging Jack: USB Type-C/Wireless charging
Low Voltage Alarm: Yes
Antenna: Two built-in antennas (FPC antenna)
Display: 320*480 resolution IPS touch color screen
Language : Chinese or English
Simulator: USB Simulator
Data Connector: USB Type-C, TEI expansion connector, DSC 3.5mm trainer Jack (PPM), SD card slot
Operating Temperature: -10℃~ +60℃
Charging Temperature: 0~45℃
Humidity Range: 20% ~ 95%
Firmware Update: Supported
Weight: 1005g
Dimensions (length x width x height): 212.5*86.7*191 mm
Certification: SRRC, CE, FCC ID: 2A2UNPL18ULTRA
Compatible FTR8B Receivers: Receiver with AFHDS 3 protocol, such as FTr12B, FTr8B, Tr8B, FTr10, FTr16S, FTr4, INr6-HS and TMr for RC air models, FGr8B, FGr4B, FGr12B, FGr4P, FGr4S, FGr4 and GMr for RC cars, FBr12 for RC boats, etc.
Model Type: Airplanes, gliders,helicopters, multicomputers, cars, boats or robots
Product Model: FTr8B Receiver
PWM Channels: 8
RF: 2.4GHz
2.4G Protocol: AFHDS 3
Antenna: Dual Antennas
Input Power: 3.5-9V
Data Output: PWM/PPM/i.BUS out/S.BUS
Temperature Range: -10℃ to +60℃
Humidity Range: 20%-95%
Online Update: Yes
Dimensions​: 46*23.8*14.8mm
Weight: 11.3g
Package List:
1 x Transmitter
1 x Receiver
1 x Transmitter User Manual
1 x Receiver User Manual
1 x FS-XC101BVD Voltage Detection Cable
1 x FS-XC201 Type-C Data Cable
1 x IFWC03 Wireless Charger
1 x FS-YGT01 Joystick Grip Set (Includes: 2 x Upper Grips, 8 x Middle Grips, 2 x Lower Grips)
4 x Orange Long Toggle Switch Covers
6 x Orange Short Toggle Switch Covers
4 x Black Long Toggle Switch Covers
6 x Black Short Toggle Switch Covers
8 x Black Aluminum Toggle Switch Lock Nuts
8 x Black Toggle Switch Lock Nuts
2 x FS-HSJ01 Grip Tape
1 x Screen Protector
1 x SWE Two-Position Toggle Switch (with PCB)
1 x SWG Two-Position Toggle Switch (with PCB)
1 x 1.5mm Metric Hex Key
1 x 2.5mm Metric Hex Key
1 x Center of Gravity Adjustment Hook
1 x Center of Gravity Adjustment Cap
1 x Screw
4 x FS-BKTH-14T Spring Seat Assembly
4 x FS-BKTH-13T Spring Seat Assembly